Pole Line Hardware
Angle cable suspension clamps are furnished with two track bolts.
Clamps are 7” and grip 1/4″ to 7/16” diameter strand
It is mainly a L – shaped fastener generally used to join parts at a 90-degree angle.
Cable suspension clamps are available in two types.
Three Bolt type clamps have a center hole for mounting with a 5/8” Bolt.
CATV Crossover Clamps come with two 3/8” carriage bolt and nuts
Clevis Eye Extension is rendered with nut, absolute one hex bolt and cotter pins.
It is used in pairs for alignment and support of crossarm.
It is used to support crossarm construction made of steel angle
An eye bolt is a bolt with a loop at one end.
They are used to firmly attach a securing eye to a structure, so that ropes or cables may then be tied to it.
Forged Oval Eye Bolt are used with thimbles, clevises and other pole line hardware items for overhead guying and deadending.
They are Hot Dip Galvanised with rolled threads and furnished with one square nut.
Ends have cone points.
Pins are forged with cast lead threads for high voltage insulators. Long shank pins are furnished with a square nut and MF type lock nut.
Pins are made with 1” cast lead threads for low voltage insulators. 1/2” and 5/8” long shank pins are furnished with a washer, a square nut and MF type lock nut. Short shank pins come with a square nut and MF type lock nut.
Forged Thimble Eye Bolt eliminate the use of thimbles, strain plates, guy hooks and extra strands to attach guys to poles and crossarms. Bolts have two styles: Straight and Bent angle at a 450 angle. Furnished with one square nut. Ends have cone points.
Grounding clamps are attached with the ground wires to shield wire supports or bolts on distribution lines.
It is used as an attachment on one side for the additional support on the pole for suspension of cable
It is used for attaching guy wires with the pole. The rounded grooves protect the strands from damages.
Guy clamps have straight parallel grooves which will not damage guy strands.
Clamps come complete with bolts.
It is used for attaching guy wires with the pole.
Clevis is used on the end of single spool bracket
It is used to connect the spool insulator on the pole and mainly used in low voltage dead end
Generally used with 5/8” or larger eye bolts or eye nuts for giving a flexible mounting to equalize the strains at corners
It is used for mounting insulators on the poles of the distribution line.
It is designed to support pole cross arm to provide strength and extended life
L – Bolt are used to attach a plate member to concrete or masonry foundation, provide anchorage for lightweight pole bases, and for general anchorage to concrete.
Malleable Guy clip provide a strong and economical method for securing down guys and wire rope.
The malleable iron base and steel U-Bolt are hot dip galvanized
They are used for dead-ending and guying from the threaded end of the bolts.
It is used for connecting two conductors by accommodating one in each groove.
These clamps are used for mounting suspension or tension clamps with the pole
The flat side of the flanged channel section is for mounting against the pole by a 5/8” Mounting bolt. The lower hole is slotted 11/16” x 1/4″
It is used to connect the spool insulator on the pole and mainly used in low voltage dead end or pole corner.
It is designed to support pole cross arm to provide strength and extended life.
Eyelets are used for attaching under the head or nut of a bolt.
Stay plate or anchor plate are connected with the stay rod for anchoring
It is used for connecting stay wire with the ground anchor.
Eyelets are used for attaching under the head or nut of a bolt. Thimble eyelet is of Straight as well as Angled Type.
Thimble eyenuts are attached to through bolts or the threaded end of straight or angle thimble eyebolt for span, head and stub guying.
Twin eyenut are used for head and stub guying of two strands.
U – bolt are U shaped bolts with screw threads on both ends.